Polyurethane Foam Injection in Bernalillo, NM
What Your Neighbors Are Saying About Us
How Polyurethane Foam Injection Works
Polyurethane foam injection is an advanced method for lifting and leveling concrete slabs. This technique is a modern alternative to traditional mudjacking (slabjacking) and is used to stabilize sinking driveways, sidewalks, patios, foundation slabs, and roads.
At Bernalillo Foundation Repair, we specialize in high-density polyurethane foam injection to provide long-lasting, eco-friendly, and cost-effective solutions for sunken concrete.
Common Causes of Sinking Concrete
1. Soil Erosion
- Water runoff, heavy rains, or plumbing leaks can wash away soil beneath concrete, creating voids.
2. Expansive Soil Movement
- Bernalillo’s clay-based soil expands and contracts, causing foundation shifting.
3. Poor Soil Compaction
- If the ground was not properly compacted before concrete installation, it can settle unevenly over time.
4. Heavy Load Stress
- Excess weight from vehicles, equipment, or structures can cause slabs to sink.
5. Tree Root Growth
- Expanding tree roots absorb moisture and shift soil, leading to uneven concrete surfaces.
Our Services
- Concrete Slab Foundation Repair
- Pier and Beam or Block and Base Foundation Repair
- Basement Wall Repair
- Elevated Pilings or Stilts Foundation Repair
- Basement Waterproofing
- Cracked Wall / Structural Repair
- House Raising / Lifting
- House Leveling
- Mudjacking / Slabjacking
- Retaining Wall Repair
- Polyurethane Foam Injection
- Commercial Foundation Repair
- Mobile Homes
- Gutter Installation
- Slab Foundation Replacement (New Installation)
- Soil Stabilization
- Void Filling
- Pressed Concrete Pilings
- Pressed Steel Pilings
- Steel Push Pier Installation
- Slab Pier Installation
- Injection Pier Installation
How We Repair Sinking Concrete with Polyurethane Foam Injection
At Bernalillo Foundation Repair, we use state-of-the-art polyurethane foam technology to restore and level concrete:
✔ Step 1: Drill Small Holes – Tiny injection holes (much smaller than traditional mudjacking) are drilled into the slab.
✔ Step 2: Inject Expanding Foam – High-density polyurethane foam is injected under the concrete, filling voids and lifting the slab.
✔ Step 3: Quick Expansion & Leveling – The foam expands rapidly to evenly lift and stabilize the slab.
✔ Step 4: Final Sealing & Cleanup – The holes are sealed, and the surface is ready for use within minutes.
Benefits of Polyurethane Foam Injection
1. Fast & Non-Invasive Repair
- The process takes a few hours, and the area is ready for use within 15-30 minutes.
2. Cost-Effective Alternative to Concrete Replacement
- No need for costly demolition and reinstallation—foam injection saves time and money.
3. Lightweight & Long-Lasting Solution
- Polyurethane foam won’t degrade or add excessive weight to unstable soil.
4. Water-Resistant & Prevents Future Erosion
- The foam is waterproof and won’t break down in wet conditions.
5. Eco-Friendly & Safe for Soil
- Unlike cement-based mudjacking, polyurethane foam is an environmentally friendly alternative.
What to Expect During Polyurethane Foam Injection
Step 1: Free Concrete Inspection
✔ Identify voids, sinking areas, and soil conditions.
✔ Assess whether polyurethane foam injection or an alternative repair method is the best solution.
Step 2: Choosing the Right Injection Material
✔ Select the proper foam type for the weight and stability of your concrete slab.
Step 3: Concrete Lifting & Leveling
✔ Drill small holes, inject the foam, and allow it to expand.
✔ Ensure proper leveling and soil stabilization.
Step 4: Final Inspection & Warranty
✔ Confirm slab is properly aligned and stable.
✔ Provide a lifetime transferable warranty.
Cost of Polyurethane Foam Injection in Bernalillo, NM
* Slab Size & Thickness – Larger slabs need more foam material.
* Extent of Settlement – Deeper voids require higher foam volume.
* Type of Foam Used – High-density polyurethane foam costs more than traditional lifting materials.
Estimated Repair Costs
* Small Concrete Sections (Sidewalks & Patios): $500 – $2,500
* Driveways & Garage Floors: $2,500 – $7,500
* Foundation Slab Leveling: $5,000 – $15,000
* Call 505-587-5787 today for a FREE estimate!
FAQs About Polyurethane Foam Injection
Find answers to our most commonly asked questions, from our services and pricing to the benefits of working with us. For more assistance, feel free to reach out to our team!
1. How do I know if polyurethane foam injection is right for my concrete?
✔ If your driveway, sidewalk, patio, or foundation slab is sinking, foam injection can lift it back to its original position.
2. Is polyurethane foam injection better than mudjacking?
✔ Yes! Polyurethane foam is lighter, cures faster, and provides longer-lasting stabilization compared to traditional mudjacking.
3. How long does polyurethane foam injection take?
✔ Most jobs are completed within 1-3 hours, and the concrete can be used within 15-30 minutes.
4. Can polyurethane foam injection be done in cold weather?
✔ Yes! Unlike cement-based materials, polyurethane foam expands efficiently in all temperatures.
Looking for Polyurethane Foam Injection Near Me?
If you need polyurethane foam injection in Bernalillo, NM, trust Bernalillo Foundation Repair to lift and stabilize your concrete surfaces efficiently.
* Call 505-587-5787 for a FREE estimate today!